Cannon-instrument CMRV-4500 Manual de usuario Pagina 124
- Pagina / 128
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
118
CANNON
®
Mini-Rotary Viscometer CMRV-4500 Instruction & Operation Manual
Version 1.1e—October, 2011 • CANNON
®
Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
3. Plug the converter’s RS-232 25-pin connector into the COM port you
selected for multi-unit configuration during installation of the CMRV
software. If you are using COM 1, a DB-25 to 9-pin adaptor may be
required.
4. Select a CMRV unit as the first in the “daisy chain” and attach the
three wires from the converter to the ABG connection marked IN on
the RS-485 port on the back of the first CMRV chassis as follows
(see diagram):
Attach the red wire to IN-A.
Attach the white or brown
wire to IN-B.
Attach the black wire to IN-G.
5. Set an Instrument Address for
the first CMRV unit using the
SELECT dial above the RS-485 port on the
CMRV chassis.
6. Locate one of the 8' cables included with the
interface kit.
7. Connect one end of the cable to the RS-485 port on the first CMRV
unit as follows:
Attach the red wire to OUT-A, the white/brown wire to OUT-B, and
the black wire to OUT-G.
8. Connect the other end of the cable to the second CMRV chassis by
attaching the red wire to IN-A, the white/brown wire to IN-B, and the
black wire to IN-G.
9. Set an Instrument Address for the second CMRV unit using the
SELECT dial above the RS-485 port on the CMRV chassis. The
address must be different than that of the first CMRV.
10. To daisy-chain additional CMRV units (up to a total of four), use
additional lengths of cable provided with the interface kit and
continue in the manner described in steps 6-9. Make sure to select a
unique instrument address for each CMRV added to the chain.
NOTE
Each additional CMRV should be connected to the previous CMRV in the
daisy-chain.
11. When all CMRV units have been connected, plug the converter
power supply into an appropriate electrical outlet to complete your
installation. Check serial connections by running a cleaning cycle on
all instruments per manual instructions.
From CONVERTER
To next
CMRV unit
RS-485 connections
on the CMRV chassis
- CONTENTS 1
- CMRV-4500 2
- INTRODUCTION 7
- Instrument overview 8
- Instrument specifications 9
- Safety warnings 9
- UNPACKING AND ASSEMBLY 11
- User-Supplied Equipment 12
- CMRV-4500 APPARATUS 13
- DESCRIPTION 13
- Air/Water Heat Exchanger 15
- Front panel operations 16
- Physical placement 17
- Tubing connections 18
- Pulley-wheel installation 20
- Installation notes 21
- INSTALLATION 25
- Running the software 26
- The Instrument View window 27
- Instrument ID/Type 27
- Instrument Configuration 27
- Viewing report data 28
- Logging in 29
- Checking Instrument Settings 29
- Security options 31
- Initial security setup 32
- PREPARING FOR CMRV 35
- TESTING/CALIBRATION 35
- Inserting rotors 38
- CALIBRATING THE CMRV 39
- TEMPERATURE PROBE 39
- CALIBRATING THE 41
- CMRV CELLS 41
- Cell calibration procedure 42
- USING THE CMRV SOFTWARE 47
- Main options 48
- Analyses options 52
- Analysis types 53
- Analyses menu options 53
- Window options 54
- CMRV module menu options 55
- Profile Designer 56
- View Cell Constants 56
- Saving a configuration 57
- Calibrate Cell Constants 58
- Service menu options 60
- SUMMARY OF TEST PROCEDURE 61
- ASTM D 3829 method 62
- ASTM D 6821 method 62
- ASTM D 6896 method 63
- SAE J300 notes 63
- Delayed start option 63
- RUNNING PROFILES 65
- cover, particularly when 66
- Starting a profile 67
- Profile operation notes 68
- Displaying a profile graph 69
- Printing a profile graph 70
- MEASURING YIELD STRESS 71
- AND VISCOSITY 71
- Notes on yield stress testing 73
- Measuring apparent viscosity 73
- Notes on viscosity testing 74
- ANALYSIS CONFIGURATION 77
- Sorting analysis data 79
- Using the date filter 79
- Using the sample/error filter 80
- Resizing table columns 82
- Printing an analysis 82
- DESIGNING CUSTOMIZED 85
- PROFILES 85
- Opening the Profile Designer 86
- Interface options 87
- Managing profiles 87
- Using the Profile Editor 88
- Editing points 89
- Deleting points 89
- Cooling profile limitations 90
- Changing test parameters 91
- MRV DATA TABLE ANALYSIS 93
- ERROR LOG TABLE ANALYSIS 97
- Instrument Company 100
- EXPORT ANALYSES 101
- USING THE DATABASE 107
- Archiving old data 108
- Importing archived data 109
- WARRANTY/RETURN 111
- INFORMATION 111
- APPENDIX A — 113
- TROUBLESHOOTING 113
- APPENDIX B — 115
- REPLACEMENT PARTS LIST 115
- APPENDIX C — THERMOMETRY 117
- ASTM thermometer tables 118
- APPENDIX D — 123
- MULTI-UNIT CONFIGURATION 123
- T (continued) 127
Relacionado con productos y manuales para Instrumentos de medición Cannon-instrument CMRV-4500
(128 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.094 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales