Cannon-instrument TESC Manual de usuario descargar pdf (Pagina 16)

TESC Operator's Manual, Rev 1.0

Getting Started CANNON®

Connect cables

All primary cables are shipped with the TESC System. Refer to Figures 2, 3, and 4 as necessary.

Caution: The MAINS AC pass-through connector on the TESC base is

not controlled by the TESC System ON/OFF switch. Whenever the

TESC base is plugged in, power will be passed to the Brookfield®

viscometer.

1. Verify that the DV2T power switch is off.

2. Verify that the TESC power switch is off.

3. Connect the MAINS AC pass-through power cable from the TESC base to the DV2T.

4. Connect the RTD probe from the TESC base to the socket on the back of the DV2T.

5. Connect the MAINS AC power cable to the TESC and plug it in.

Figure 2 — TESC with Watlow® controller

Watlow®

controller

connection

(RS-485)

On/off

Watlow®

controller

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Sin comentarios

Cannon-instrument TESC Manual de usuario Pagina 16